creatoroptics
Optics, Optical components, Crystals

New Products RFQ News Contact Us

Tel: 86 25 83427907 Fax: 86 25 83426285

E-mail: sales@creatoroptics.com

Home

About Us

Products

Windows

Lenses

Prisms

Filters

Mirrors

Coating

Materials

Other

Order

Resources

Products List


	Windows
	Round
	Square
	Cuboid
	Lenses
	Single
	Complex
	Other
	Prisms
	Right Angle
	Penta
	Corner Cube
	Filters
	Mirrors
	Germanium
	Sapphire
	Silicon
	IPL
	Coating
	Materials
	Other Products

About Us
Order
Contact Us

Home > New Products > Sapphire High Reflectivity Laser Mirrors

Sapphire High Reflectivity Laser Mirrors

High purity synthetic sapphire substrate
Excellent surface flatness and parallelism
Quality high reflection coating
Spectral properties close to theoretical values
Low absorption, low scattering
High laser damage threshold

Sapphire high reflector has excellent mechanical and optical properties. It is strong and resistant to high hot and cold shocks. The surface is coated with an all-dielectric highly reflective film, which can achieve a reflectivity of more than 99.9%. It is usually used as a reflector in high-power lasers or systems.

Characteristics of sapphire high reflectivity laser mirror substrates

A high-quality sapphire high reflectivity laser mirror must use a laser-grade sapphire single crystal (Al2O3) as the substrate. There are no impurities, no inclusions, no bubbles, no birefringence inside the crystal. It is then precision cut, ground and deep CMP to complete a sapphire optical substrate with a precise profile, excellent surface quality, and surface flatness. The non-working surface of the sapphire high reflectivity laser mirror can be polished or finely ground.

Features of the coating of sapphire high reflectivity laser mirrors

Traditional high reflectivity coatings are multilayer films composed of high refractive index and low refractive index materials of 1/4 optical thickness of a specific wavelength. By increasing the number of layers, the reflectivity can exceed 99.9% or even higher. All optical films are plated in ultra-clean environments and ultra-high vacuum conditions. High reflectivity coating has the characteristics of low absorption, low scattering, and high laser damage threshold.

How to guarantee the performance of sapphire high reflectivity laser mirrors?

All sapphire high reflectivity laser mirrors provided by Creator Optics are strictly inspected. Certified raw material suppliers, precise measurement of geometric dimensions, microscopic inspection of surface quality, spectral measurements, laser damage threshold (LDT) testing as well as environmental testing and so on. All of these sapphire high reflectivity laser mirror have factory quality certification.

Specifications of Sapphire High Reflectivity Laser Mirrors:

Dimensions	Diameter from 10mm to 50mm, customized available
Thickness	customized available
Dimensions Tolerance	+/-0.1mm	+/-0.1mm
Thickness Tolerance	+/-0.05mm	+/-0.05mm
Edge	fine ground	fine ground
Chamfer	minimum 0.2 x 45°	minimum 0.2 x 45°
Surface Flatness	1/10 lambda per inch @632.8nm	1/10 lambda per inch @632.8nm
Double-sided Parallelism	30 arc seconds	30 arc seconds
Surface Qulitity	20/10	20/10
Clear Aperture	>85%	>85%
Coating	high reflection coating, customized available

* Contact our sales engineers for more information of special sapphire high reflectivity mirrors.


Sapphire Windows	Sapphire Rods	Light Guides	: +86 25 83427907
Round Windows	Micro Rods		: +86 25 83427907
Rectangular Windows	Sapphire Tips	Sapphire Piston	: +86 25 8342 6285
T-step Windows	Tapered Rods		: +86 25 8342 6285
Cone Windows			: sales@creatoroptics.com
Large Windows	Sapphire Bearings	Sapphire Blades	: sales@creatoroptics.com
Micro Windows	Sapphire Balls
Sapphire Wedges	Sapphire Bearings	Sapphire Prisms
Custom Shaped
	Sapphire Viewport	Sapphire Mirrors
Sapphire Lenses

-Home- -About Us- -Order- -Feedback- -Contact Us- -Copyright © Nanjing Creator Optics Co., Ltd. All Rights Reserved.- E-mail:sales@creatoroptics.com creatoroptics@hotmail.com